ASTM C1193 Joint Sealants Use Guide
Things about ASTM-C1193: Standard guide for use of joint sealants 1.1 This guide describes the use of a cold liquid-applied sealant for joint sealing applications. Including joints on buildings and related adjacent areas, such as plazas, decks, and pavements for vehicular or pedestrian use, and types of construction other than highways and airfield pavements and […]
ASTM C1184 Structural Sealants Standard
Things about ASTM-C1184-00a: Standard Specification for Structural Silicone Sealants 1.1 This specification describes the properties of cold liquid applied, single-component or multicomponent, chemically curing elastomeric structural silicone sealants herein referred to as the sealant. These sealants are intended to structurally adhere to components of structural sealant glazing systems. 1.2 Only those properties for which there […]
ASTM C1172 Laminated Glass Standard
Things about ASTM-C1172-03: Standard specification for Laminated Architectural Flat Glass 1.1 This specification covers the quality requirements for cut sizes of flat laminated glass consisting of two or more lites of glass bonded with an interlayer material for use in building glazing. 1.2 Depending on the number, thickness, and treatment of plies, and the number […]
ASTM C1135 Sealant Tension Test Method
Things about ASTM-C1135: Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants 1.1 This test method covers a laboratory procedure for quantitatively measuring the tensile adhesion properties of structural sealants, hereinafter referred to as the “sealant”. 1.2 The values stated in SI (metric) units are to be regarded as the standard. The inch-pound […]
ASTM C1087 Sealant Compatibility Test Method
Things about ASTM-C1087: Standard Test Method for Determining Compatibility of Liquid-applied Sealants Accessories Used in Structural Glazing Systems 1.1 This test method covers a laboratory screening procedure for determining the compatibility of liquid-applied structural sealant glazing sealants when in contact with accessories such as dry glazing gaskets, spacers, shims, and setting blocks after exposure to […]